When installing the solar inverter, it must not be installed in an environment where it can be exposed, especially rain will cause moisture. It is very impossible, and no water is allowed on the power of the solar inverter. The temperature of the solar inverter environment should be controlled between 1-40 degrees Celsius, can not be higher or lower than him. Solar inverters cannot be installed in the middle of flammable objects, and cannot be placed in places that are easily exposed to dust.
If the cable is very long, do not use it, but you need to isolate your solar inverter from the battery. The battery is also not exposed to the outside. The generated gas is very corrosive, if it is very long. It will damage the solar inverter inside. The place where the solar inverter is connected to the ground is directly connected to its own load. The power supply inside it can control its own technology application. A basic circuit is still very simple, but the content of its own output with Ningbo is also Very large, also because the current inside is very large, and then transferred out of one's own multiple designs of own power supply content is very small, but also can be elegant inside the waveform, and later obtained a very wide application.
