1. Do not install solar cell modules in shaded places such as trees and buildings, and do not place them near open flames or flammable materials. The assembly structure should be able to adapt to environmental requirements. Please choose appropriate materials and anti-corrosion treatment. Install components in a firm and reliable way. The components or falling from high altitude will cause financial damage. The component cannot be disassembled, bent or hit the component with a hard object to avoid dangerous actions such as stepping on the component.
2. It is necessary to use a spring washer and a flat washer to lower the battery panel assembly to fix and lock it on the bracket. The installation of the solar power generation panel is preferably about 30 degrees to the sun. Component wiring.
3. The battery board assembly should be correctly connected to the positive and negative terminals in the junction box. The output circuit should be correctly connected to the device. Do not short the positive and negative terminals. Or electrical shock.
4. Frequently check whether the lifting structure has fallen off. If necessary, tighten each component and check the connection status of each component, each wire, bottom line and plug.
5, Often use a soft cloth to inspect the surface of the test component. If you do replace (usually 25 years) battery panel components, you should choose components of the same model and type. Do not touch the part of the cable connector with your hands. If you really need it, please use safety equipment (such as insulating gloves).
6. Please cover the surface of the module with opaque objects or materials when repairing the module, because the module will generate high voltage under strong light, which is very dangerous. The warranty period of the module is 3 years. The power attenuation of the module will not exceed 10% within 10 years, and will not exceed 20% within 20 years.
