2400W/2560Wh Portable Power Station

2400W/2560Wh Portable Power Station

I.Product Technical Features

The BP2400E is an all-in-one portable power station featuring a built-in bidirectional pure sine-wave inverter. It delivers high-power output, fast charging, comprehensive safety protection, and remote monitoring, making it suitable for household and outdoor emergency power applications.

1.2400W Pure-Sine-Wave Bidirectional Inverter & UPS Backup Function

It provides 2400 W continuous AC output with a pure sine-wave waveform (THDV ≤ 3 %), compatible with sensitive electronics such as refrigerators, laptops, and small medical home appliances. It includes a UPS bypass function with a typical 20 ms transfer time. The unit automatically switches to battery power once mains power is lost, sustaining power for critical household devices. AC output voltage (100-240 V AC) and frequency (50/60 Hz) are adjustable for global grid compatibility.

2. Comprehensive Output Ports for Simultaneous Multi-Device Power Supply

●AC: 2 × EU-standard AC outlets; 2 × Type-C PD 100 W ports; 4 × USB-A 18 W fast-charge ports; 4 × DC5521 ports; 1 × 120 W car cigarette-lighter port

●Rear-mounted 3 W emergency LED light with multiple modes: high-brightness, strobe, medium brightness, low brightness, and SOS signal

●Supports mainstream fast-charging protocols including QC3.0, AFC, FCP and Apple fast-charge. Charge and run smartphones, laptops, portable refrigerators, and outdoor power tools at the same time.

3. Multi-Source Fast Charging with Bidirectional Inverter Architecture

●Max 2000 W AC input enables rapid recharging. The integrated MPPT solar controller supports up to 800 W solar panel input for off-grid photovoltaic charging. XT60 car-port charging is also supported.

●The bidirectional inverter design routes AC charging through the internal inverter module, removing the need for bulky external adapters and lowering power losses. Peak inverter efficiency reaches up to 93.4 %.

4. Smart Device Management via WiFi + Bluetooth APP

Monitor real-time remaining battery capacity, input/output power, and estimated runtime via the mobile APP. Remotely enable or disable AC, DC, and USB output modules. Customize display backlight timeout, module auto-shutdown, and system standby settings. Visual fault alert notifications are available. Bluetooth allows local control even without internet connectivity.

5. Full-Feature BMS Battery Protection System

Built-in protection against over-voltage, under-voltage, over-current, short-circuit, high-temperature, and low-temperature conditions. Independent temperature thresholds apply for charging and discharging cycles. Intelligent PWM fan speed regulation optimizes cooling. The LCD screen displays readable error codes for quick troubleshooting. MTBF reaches 250 000 hours (250KHrs) for stable long-term operation.

6. Practical User-Centered Hardware Design

High-definition LCD screen clearly displays battery level, power readings, AC output frequency, and system error codes. Dedicated independent buttons for AC, DC, USB, and LED controls. Integrated carrying handle plus side ventilation grilles for thermal dissipation. Multi-level auto-standby logic reduces idle power draw; standby power consumption is less than 2 mA.

7. Wide Operating Temperature for Harsh Working Conditions

Operating temperature: -25 °C ~ +70 °C (power derating is required above 45 °C). Storage temperature: -40 °C ~ +70 °C. Rated performance up to 2000 m altitude (derate output by 1 °C for every additional 200 m above 2000 m). Functions reliably under relative humidity up to 95 % (non-condensing), ideal for cold-climate, high-heat and field disaster-relief deployments.

II. Full Product Specifications

III. Product Certifications

For global B2B wholesale and engineering clients, we can provide complete test reports upon request, based on your target-market requirements.

EMC Compliance: EN55032, EN55035, IEC61000-3-2, IEC61000-3-3, satisfying EU electromagnetic compatibility requirements.

Product Safety: Certifications including CE-LVD, UKCA, FCC and PSE are available upon request via third-party laboratory testing.

Lithium-ion Battery Shipping Compliance: Classified as UN3481 (Lithium-ion batteries contained in equipment). We can supply UN38.3 battery test reports and MSDS documents to meet basic sea and air transport requirements.

Insulation Safety: Minimum insulation resistance ≥10 MΩ. Passed high-voltage hipot testing for AC-to-housing, AC-to-DC, and DC-to-housing circuits. Grounding resistance ≤0.1 Ω to protect end-user safety.

Note: Market-access regulatory requirements differ by country. Please notify our sales team of your destination market before placing orders so we can advise suitable certification solutions.

IV. Packaging & Export Guidelines

The BP2400E contains high-capacity lithium-ion batteries (> 100 Wh), classified as Class 9 dangerous goods. All sea and air shipments must fully comply with IMDG / IATA dangerous-goods regulations.

1. Packaging Options

Domestic shipments: Reinforced standard carton.

Sea/air export shipments: UN-certified dangerous-goods carton (UN4G) is mandatory. Outer cartons must display complete UN markings, lithium-battery hazard warning labels, and correct shipping description. Products classified as UN3481 "Lithium-ion batteries contained in equipment" cannot be shipped inside ordinary non-UN cartons.

2. Mandatory Documentation for Export Shipment

UN38.3 battery test report

MSDS Material Safety Data Sheet

Dangerous-goods packaging performance certificate and usage appraisal certificate

Official product specification datasheet

Lithium-battery hazard labels for outer-carton application

3. Pre-Shipment Product Protection Requirements

Factory recommended state-of-charge: 30-50 % SOC. Avoid full-charge state for long-duration sea freight storage.

All output ports shall be insulated to prevent short-circuit hazards caused by stray metal objects in transit.

Fit EPE foam corner protectors inside cartons to prevent casing and LCD screen damage from rough handling.

4. Regional Configuration Recommendations

AC output voltage, frequency, and socket variants (EU / US, etc.) can be pre-configured at the factory. End-users are strongly advised against manually modifying internal voltage parameters.

Important Reminder: Air freight applies strict weight and power-rating restrictions for large-capacity power stations. Sea freight is the preferred shipping method for bulk volume orders.

V. FAQ

Q1: Can the BP2400E's UPS function replace industrial-grade server UPS hardware?

A: This unit delivers entry-level household UPS bypass performance with a typical 20 ms transfer time. It works well for home routers, security cameras, desktop PCs, and small domestic refrigerators. It is NOT recommended for servers or precision industrial equipment requiring near-zero transfer time. To activate UPS standby mode, keep the unit connected to mains power and leave the AC output enabled.

Q2: How do I select compatible solar panels? What is the maximum supported solar charging wattage?

A: The built-in MPPT charge controller supports up to 800 W solar input within a voltage range of 11-59 V DC. Your solar panel open-circuit voltage should sit between 20 and 55 V and be connected to the unit via an XT60 connector. An open-circuit voltage exceeding 59 V will trigger over-voltage protection and halt charging. Wire panels in series to control the total voltage before connecting to the power station.

Q3: What actions should I take when ER-prefixed error codes appear on the display screen?

A: Error codes prefixed "ER" indicate system faults (examples: Er001 = DC output over-current; Er005 = over-temperature). First, disconnect all connected loads. Power the unit off, allow it to rest for 5-10 minutes, then restart. If fault codes persist, cross-reference against the error-code table in the user manual: reduce connected loads and improve ventilation for over-current or over-temperature faults; stop all charge-discharge cycles for battery-related alarms. Do not continue operating the unit under active fault conditions. You can retrieve fault event logs from the mobile APP to speed up after-sales diagnosis.

VI. CTA Section (Place at bottom of product page)

BP2400E 2400W/2560Wh Portable Power Station | Ideal Solution for Home Emergency, Field Work and Disaster-Backup Power

✅ OEM & ODM customization supported: Custom logo printing, factory-pre-set AC voltage & frequency settings, custom packaging and firmware adjustments

✅ Product sample testing available. Bulk-volume orders include complete certification paperwork and UN-compliant dangerous-goods shipping packaging

✅ Our in-house engineering team provides pre-sales product-selection consultation, export-compliance guidance and ongoing after-sales technical support

👉 Request a quotation & specification documents: Contact our sales team. Share your target sales market and order quantity to receive complete BOM details, test reports, and a tailored shipping solution.

👉 Download full PDF datasheet | View real-world performance test cases | Enquire about MOQ and production lead-time